Multi-valve water softener

Detailed Product Description

JM Multi-valve control system consists of a signal splitter, and a time / flow program controller structure, fixed on the waterproof controller enclosure. The signal splitter is a rotary-driven valve, to guide a liquid or gas source switching device for opening and closing the various diaphragm valves, thus completing the automatic control equipment system. Signal splitter valve core from the solid corrosion-resistant, self-lubricating material, with a long service life, maintenance-free characteristics. The valve can choose to perform operations at home and abroad have been using very sophisticated hydraulic or pneumatic diaphragm valves, 1.5 "~ 6" may be supporting the use of Æ600 ~ Æ3000 the tank, this valve low cost, easy installation, easy maintenance , non-professional staff to complete the inspection, maintenance, replacement and other operations. JMA multi-function valve controller to set a password-protected calendar years show regeneration step, regeneration time reduced to demonstrate the chain of control and steps to control the signal output timing to start, interval start, Far EasTone (flow or analytical instruments) contact to start on the in the interim start-up and place a mandatory five ways to start a mandatory step to start (for on-site debugging) original position automatically reset regeneration process steps (1-8), and each step time (1-9999 seconds) arbitrarily set the system status signal display (such as system status feedback signal regeneration work or display) power failure protection function: After the cumulative flow of power failure, set the volume value and other settings of the parameters remain longer than three years of instrument used plastic shell with a dust, corrosion, water splash shooting and other functions signal splitter works: divider by time or flow-control procedures for a small motor-driven device can also be rotated manually rotated. Go to a different location will have one or a few pores open or closed, distributor pore number and the location of system operation steps corresponding to (such as charts), the pore is opened to guide the signal source of pressure-driven diaphragm valves movements, while emptying the other diaphragm valve, to restore its normal position. The signal source of stress-driven diaphragm valves can be a liquid, can also be a gas. Since solenoid valves do not like the control voltage as continuing greatly reduced due to due to electrical faults and maintenance. Distributor of various devices with the timing and procedures for a variety of modular design, a variety of water treatment systems to meet the complex process control requirements. JMA controller standard configuration: reset run - as long as the timing and procedures for device in working position, divider back to the working position on the guarantee; to avoid confusion in the next regeneration process. l Case protection grade - waterproof, discharge, shock; l Power Supply - 220VAC/50HZ; l time to start the range at any time the day of week; l adjustable up to 8 programs, set time 10 ~ 9999 seconds, adjust the unit is 1 second; l-place mandatory start button; l Run / regeneration status light displays; l may be a program or some program output dry contact or electrical contact signal; with the parameters: l Power Supply: 220VAC/50HZ , 10W Power l Remote Start signal: Minimum 2 seconds of passive contact signal splitter interface l Size: 1 / 8 "G thread l pressure signal sources: gas or liquid (the proposed installation of 100μ filter) l locus of control pressure: 0.2 ~ 0.8MPa l Operating temperature: 4 ~ 60 l Controller Shell Size: 270X170X105 controller model typical application control procedures JMA 501 filter backwash → Run → ¿JMA 502 is being washed downstream regeneration softener backwash → Run → absorption of salt + replacement → being washed ¿JMA 503 filter backwash run → ¿JMA 505 counter-current regeneration softener backwash run → → absorption → salt + substitution is washed ¿JMA 506 3 tank filter run → 1 # cans Backwash → 2 # cans backwash → 3 # tank washing ¿JMA 507 4 anti-tank filter is running → 1 # cans backwash → → → 4 # cans Backwash ¿JMA 508 5 tank filter is running → 1 # cans backwash → → → → 5 # cans Backwash ¿JMA 523 filters and two jars prepared a # 1 with a run → 1 # backwash → 2 # Run → 2 # Backwash ¿JMA 524 runs downstream regeneration softener backwash → → → absorption of salt replacement → → Running water is being washed downstream ¿JMA 525 runs regeneration softener backwash → → → Replacement → absorption of salt is being washed downstream ¿JMA 526 runs regeneration softener backwash → → → absorption of salt water being washed → ¿JMA 527 Dual-tank filter backwash parallel operation 1 → → 1 → Anti-washing is washed 2 → being washed 2 ¿JMA 528 air-scrubbing filters the air scrubbing run → Drainage → backwash → → ¿JMA 529 is washed with softener salt back to run → backwash → absorption → absorption of salt + salt-salt replacement → reuse → being washed ¿JMA 530 6 cans filter run → 1 # cans backwash → → → → 6 # Wash JMA 531 7 anti-tank tank filter run → 1 # tank backwash → → → → → 7 # cans Backwash